Respiratory failure

src: pedsinreview.aappublications.org

Respiratory failure results from inadequate gas exchange by the respiratory system, meaning that the arterial oxygen, carbon dioxide or both cannot be kept at normal levels. A drop in the oxygen carried in blood is known as hypoxemia; a rise in arterial carbon dioxide levels is called hypercapnia. Respiratory failure is classified as either Type I or Type II, based on whether there is a high carbon dioxide level. The definition of respiratory failure in clinical trials usually includes increased respiratory rate, abnormal blood gases (hypoxemia, hypercapnia, or both), and evidence of increased work of breathing.

The normal partial pressure reference values are: oxygen PaO₂ more than 80 mmHg (11 kPa), and carbon dioxide PaCO₂ lesser than 45 mmHg (6.0 kPa).

Video Respiratory failure

Cause

There are multiple causes for respiratory failure for a single reason to be defined

Maps Respiratory failure

Diagnosis

Type 1

Type 1 respiratory failure is defined as a low level of oxygen in the blood (hypoxemia) without an increased level of carbon dioxide in the blood (hypercapnia), and indeed the P_aCO₂ may be normal or low. It is typically caused by a ventilation/perfusion (V/Q) mismatch; the volume of air flowing in and out of the lungs is not matched with the flow of blood to the lungs. The basic defect in type 1 respiratory failure is failure of oxygenation characterized by:

This type of respiratory failure is caused by conditions that affect oxygenation such as:

• Low ambient oxygen (e.g. at high altitude)
• Ventilation-perfusion mismatch (parts of the lung receive oxygen but not enough blood to absorb it, e.g. pulmonary embolism)
• Alveolar hypoventilation (decreased minute volume due to reduced respiratory muscle activity, e.g. in acute neuromuscular disease); this form can also cause type 2 respiratory failure if severe
• Diffusion problem (oxygen cannot enter the capillaries due to parenchymal disease, e.g. in pneumonia or ARDS)
• Shunt (oxygenated blood mixes with non-oxygenated blood from the venous system, e.g. right to left shunt)

Type 2

Hypoxemia (PaO2 <8kPa) with hypercapnia (PaCO2 >6.0kPa).

The basic defect in type 2 respiratory failure is characterized by:

Type 2 respiratory failure is caused by inadequate alveolar ventilation; both oxygen and carbon dioxide are affected. Defined as the buildup of carbon dioxide levels (P_aCO₂) that has been generated by the body but cannot be eliminated. The underlying causes include:

• Increased airways resistance (chronic obstructive pulmonary disease, asthma, suffocation)
• Reduced breathing effort (drug effects, brain stem lesion, extreme obesity)
• A decrease in the area of the lung available for gas exchange (such as in chronic bronchitis)
• Neuromuscular problems (Guillain-Barré syndrome, motor neuron disease)
• Deformed (kyphoscoliosis), rigid (ankylosing spondylitis), or flail chest.

src: www.cmaj.ca

Treatment

Treatment of the underlying cause is required. Endotracheal intubation and mechanical ventilation are required in cases of severe respiratory failure (PaO2 less than 50 mmHg). Respiratory stimulants such as doxapram are rarely used, and if the respiratory failure resulted from an overdose of sedative drugs such as opioids or benzodiazepines, then the appropriate antidote (naloxone or flumazenil, respectively) will be given.

There is tentative evidence that in those with respiratory failure identified before arrival in hospital, continuous positive airway pressure can be useful when started before conveying to hospital.

src: erj.ersjournals.com

See also

• Ventilation/perfusion ratio
• Pulmonary shunt

src: www.medinterestgroup.com

References

src: thorax.bmj.com

External links

Source of article : Wikipedia